Cell Culturing and Learning ECIS

Today I cultured BSC-1 cells on my own! I worked with the techniques taught to me last week, and split a single flask of confluent cells into two. I first practiced my mechanical pipetting skills, and then dove right into culturing my cells. Every 20 minutes I checked back on my cells to examine the rate at which they were growing. I found that as time went on, the cells began to assemble themselves into tiny clusters. When I arrive at my internship next week, I will take a look at my cells to see how they have multiplied and if they have grown into a confluent layer. (Fingers crossed I managed to avoid any type of contamination!)

Today, I was also introduced to the ECIS technology. Dr. Keese taught me how to run an RC test, which is essentially a computer chip that is engineered to mimic cell behaviors on an electrode. (How someone programs a computer chip to model cell behavior is something way over my head right now, but maybe with a few more internship visits I will begin to grasp this concept!) I then plugged this chip into the ECIS instrument, and was able to get a test graph. The graph was just eight horizontal lines of varying color and value. Next week, I will be putting the ECIS software onto my own laptop, and I will learn how to place my cultured cells in an eight-welled electrode. The graphs of living cells will obviously have a very different graph than the RC test chip. An ECIS cell graph will have multiple lines that originate in the same place, then steadily increase as they divide and multiply faster rate.

Our 8-welled RC test graph.

What our ECIS graph of cell behavior will look like.

I did not go to my internship today due to the Parent's Day schedule. Looking forward to next week!

Cell Culture

Today at my internship I learned how to grow cells in culture! First, we created a liquid medium for the cells to grow in. Our DMEM medium consists of 90% nutrients including salts, glucose, amino acid, and vitamins. The remaining 10% of the medium is growth factors, specifically, serum. Serum is very important for cell growth as it provides cells with adhesion factors, hormones and lipids and other minerals that allow the cell to grow as a confluent layer across a surface. The serum used in our medium is Fetal Bovine Serum. It is a (somewhat creepy) amber liquid that is a remnant of the coagulated blood collected from a cow  fetus. The red blood cells are taken out of the serum by centrifuge, and growth factors and a small amount of antibodies are left. 0.55 mL of antibiotics was also added to our medium, which is a key factor in inhibiting any type of contamination in the cultured cells, including bacterial, fungal, yeast, mold, and viral growth. Avoiding contamination is extremely important in keeping healthy cells alive and multiplying. To avoid any type of contamination, we worked in a ventilated hood that filtered out any pathogens in the air, wore gloves, disposed of all pipettes after a single use, and cleaned the surfaces of anything that might come into contact with the cells with isopropanol.

Next, we took a flask of growing BSC-1 cells, which are African green monkey kidney cells. These cells are epithelial cells, which grow attached to a substrate. Our goal was to split these cells into two flasks, and in order to do so, we needed to get them off the surface of the flask which they were growing on. We did this by adding a solution known as Trypsin which is a protease that essentially eats away at the cell membranes, thus making them weak and unable to hold onto the surface. They were only exposed to the solution for a few seconds, as we did not want to damage the cells beyond repair. The suspended cells were round and more mobile compared to the initial cells that were growing on the surface of the flask. The initial cells were a mixture of round and long, football-shaped cells.

We then added the medium, and split the cells into two flasks. As they begin to grow and spread out as a layer on the bottom of the flask, they start to resemble tiny islands floating in the pink solution of the medium. My internship (sadly) only lasts three hours, so I will not be able to see the cells grow into a confluent layer until next time. However, as I checked on my cells every 20 minutes, I began to see them grow into these tiny clusters. We stored our BSC-1 cells in an incubator that is set at 37 degrees Celsius- about body temperature. The cells are kept in a humid environment, with 5% carbon-dioxide. The carbon-dioxide acts as a buffer zone that keeps the pH of the cell cultures at a healthy level- about pH 7.4.

I arrived at my internship (formally) for the first time on Friday. I was introduced to potential customers of Applied Biophysics' ECIS technology. I jumped in on their sales meeting and was instantly immersed in the complexity of the product. Through the next three hours, my brain churned as it tried to translate an incredible amount of technical terms into English. It wasn't easy to understand, but the brilliant people surrounding me seemed very enthused about new and altered features of the latest electrode arrays and ECIS graphing software. Both the clients and my mentors generously took a bit their time to catch me up to speed on the generalities of the company's history, the ECIS instrument, and software system. 

A major component of Applied Biophysics' product line are its different types of arrays and assays. An array is essentially a plastic slide with indentations in which cultured cells are placed. On the undersurface of the indentations are electrodes made of a thin layer of gold. Gold is a good conductor, and can therefore send an indirect, specified pulse of AC current to the cells. The AC current is able to be carried through the leads to the array, and back to the ECIS instrument. As the number of cells in each well multiplies, they cause less current to be transmitted to the ECIS instrument. This decrease in measure of current is called Impedance (Z). In the meeting, a new, more statistically accurate 96 well plate array was featured. 

I also learned the about different applications of the ECIS technology. Wound healing was one of the most interesting ability of ECIS. The cells in the array are sent a current of the highest voltage for a few seconds and are injured, but can recover. This leaves the cells permeable to otherwise impermeable substances, such as DNA or RNA. This method of cell wounding is preferred over manual wounding because it is precise, allows the researcher to deduce quantitative data, and does not remove necessary cell proteins. Along with this application is the idea of the "electric fence". The electric fence uses high voltage AC current to kill cells on the electrode. By killing these cells off, researchers are able to measure and observe the rate cell migration into that empty space.